Static Bars - Model VS

The Model VS Extra Powerful Static Bar

The HAUG VS ionizing bar reliably removes electrostatic charges and its performance, when compared to the standard version, is three times the power. This tremendously improves the static removal and designed to address extremely high charges, faster speeds and greater distances.

The VS ionizing bar has all of the typical features that characterize HAUG ionizing bars: the reliable and removable plug-and-socket connection System X-2000, the shielded high-voltage cable, the special stainless-steel electrodes and the convenience of being safe to touch.

The electrical capacity of the VS ionizing bar is three times as great as the standard version, and therefore, it is necessary to base any power pack load calculations on a bar length three times as long.

Example:
VS static bar - 50 cm with 200 cm cable
Power pack load: 3 x 50 cm + 200 cm = 350 cm



Further bar variations are available:
These static bars can also be provided with high-voltage connection at the end of the bar for series connection of ionizing units (daisy-chain units end to end) or without HV-cable, suitable for connection of a flexible, separate high-voltage cable with elbows or tees - a variety of systems to "minimize" the need for excessive cable and extra power supplies, a significant advantage over competitive systems such as in "halo" blow-offs for paint lines where several static bars with air blades can be connected end to end.

Dimensions


Applications

  • Plastic processing industry : Film processing, packaging machines, film extruders, etc.
  • Textile industry : Weaving and spinning mills, textile finishing plants, etc.
  • Graphic industry : Screen and pad printing machines, photographic and film processing machines, folding machines, etc.
  • Paint Shops : Car painting, painting of plastic components, etc.

Other Information


When the application calls for a hand held static elimination device the ideal product is an Ionizing Air Gun. Important features should be ergonometric design, weight and flexibility. Cable should be fully shielded especially with anti-static guns to have adequate life expectency.

The Haug Ion Gun is ergonometrically designed, "repairable", and extremely powerful for applications where a flexible hand-held unit is required. Cable is lightweight, and fully shielded. This unique design consists of specific parts so that they can actually be repaired by replacing the damaged part, either by returning to Nex Flow or ordering the part and repairing it in the field. Due to the often rough handling ion guns receive in an industrial environment, the Haug Ion Gun is an ideal choice against inferior and low quality, unrepairable products. The Ion Gun comes with fully shielded and flexible cable and the patented safety connector insuring the ultimate in safety and quality in the field.

SPECIAL NOTES :
Haug static bars all come with a patented connector to assure safety in operation and maintenance. Field repairable, it prevents a connection if the static bar is removed or attached while power is still on at the power supply.

Cable is FULLY SHIELDED unlike some manufacturers which claim shielding which may only be partial. This results in a much longer life for Haug products.

REPAIRABLE POWER SUPPLIES - almost unheard of in the industry, Haug power supplies are repairable and come with a 2 year warranty.