Questionnaire

   
  A) NAME OF CusTOMER:
  B) ADDRESS OF CusTOMER:
  C) PHONE NO :

  D) E-MAIL ADDRESS :

  E) CusTOMER'S REFERENCE:

  F) NAME OF PERSON GIVING DETAILS:
  G) DEPARTMENT:
  H) QUANTITY REQUIRED: Immediate
  Future
 1. CAPACITY (THRusT IN TONNAGE)  

      ¼ TON     ½ TON     1 TON     2 TON
      5 TON      Any other ( Please specify )

 2. TYPE OF PRESS REQUIRED
      Impact     Toggle      Conventional
      Any other ( Please specify )

  3. TYPE OF FRAME REQUIRED  
       'C' Frame
       Pillar Frame With One, Two, or Four Pillars
       Arbor Frame
       Single Pillar With Upward/Downward/Swivel Movement
       Any other (Please specify)

 
  4. RAM TRAVEL REQUIRED a) Minimum       mm
b) Maximum mm
  5. CLEAR WORKING AREA REQUIRED mm      X   mm
  6. CLEAR DAYLIGHT REQUIRED

a) Minimum mm
b) Maximum mm
  7. THROAT DEPTH REQUIRED
       (For Single  Pillar, 'C' Frame &Arbor Type of Presses)

mm
  8. BASE PLATE CONSTRUCTION REQUIRED  
Diagonal 'T' or plain slots Threaded or plain holes
Uni-directional 'T' or plain slots Centre hole
Bi-directional 'T' or plain slots Plain
       Specify Applicable Size  
 
'T' slot size Plain hole size & distances
Plain slot size Centre hole size
Threaded hole size & distances

  9. GUIDES REQUIRED 
          Specify if guides required,  for centering  & to prevent rotation of the ram.

  10. TYPE OF PUNCH HOLDER REQUIRED
 
Hole to suit punch  (Specify size)
Male collar to suit punch  (Specify size)
Male threaded to suit punch  (Specify size)
Female threaded to suit punch  (Specify size)
Any other  (Please specify)
  11. CONTROLS & ACCESSORIES
 
  ( Specify types of controls & accessories required )
  a) For Ram operation and Return
  Hand Lever Operated Valve, spring return or push pull type
  Foot Operated Valve, spring return or double treadle type
  Two Hand Operated Valves interlocked to prevent actuation of ram unless both Valves are pressed 
    simultaneously.
  Solenoid Valves
  Pilot Signal Actuated Valves
  Signal Selection
  b) Flow Control Valves for Speed Control of Ram
 
   For Working Stroke
   For Return Stroke
  c) Quick Exhaust Valves for quick action of Ram
 
   For Working Stroke
   For Return Stroke
  d)     Silencers/Mufflers for dampening the exhaust noise
  e)     Cycle Sequencing
  f)        Air Pressure Regulator
  g)    Air Filter/Moisture Separator
  h)    Air Lubricator
  i)     Non Return Valve to prevent sudden release of Ram in case of pressure failure.
  j)     Any other controls (Please specify)                             
  12. ANY SPECIAL FEATURE(S) REQUIRED
 
Cushioning of the stroke at either or both ends
Completely enclosed frame for protection against explosion or sudden release/breakage of components etc.
Hinged or folding guard to protect against sudden release/breakage of components
Interlocking of hinged door to prevent start of working stroke unless door is locked.
Toggle clamp for holding component
Separate control panel
Any other (Please specify)
   APPLICATION IN BRIEF
Page -   1   2